Elegine's Networked Tubular Motors are for controlling Roller Blinds, and are designed to be connected to a variety of Home Automation Systems (HAS) & Building Automation Systems (BMS) - including Clipsal C-Bus, AMX, Crestron, Control4, LonWorks, etc. Elegine's Networked Tubular Motor can be controlled by any combination of the following interfaces:
-
RF Remote Control
-
HAS/BMS Switch
-
HAS/BMS Touch Screen
-
RS-232 DB9
-
Computer
Specification Table:
35mm Motor
|
NETM35/10/20-1 |
NETM35/6/36-1 |
NETM35/10/17-2 |
NETM35/6/28-2 |
|
Diameter |
35 mm |
35 mm |
35 mm |
35 mm |
|
Torque |
10 Nm |
6 Nm |
10 Nm |
6 Nm |
|
Output Speed |
20 RPM |
36 RPM |
17 RPM |
28 RPM |
|
Supply Voltage |
120 Vac |
120 Vac |
230 Vac |
230 Vac |
|
Supply Cycles |
60 Hz |
60 Hz |
50 Hz |
50 Hz |
|
Supply Current |
1.32 A |
1.32 A |
0.56 A |
0.5 A |
|
Continuous Running Time |
4 minutes |
4 minutes |
4 minutes |
4 minutes |
For specifications on other models available, please contact our technical service centre. Elegine reserves the right to change specifications at any time without notice.